04
2024
-
06
Be careful when maintaining your faucet
Classification:
After choosing a faucet, improper maintenance will affect its service life, which is a headache for many people. The frequency of use of faucets is high, and faucets are used every day in daily life. Under such a high frequency of use, how can we maintain the faucet and increase its service life? In fact, this is not a difficult task.
After choosing a faucet, improper maintenance will affect its service life, which is a headache for many people. The frequency of use of faucets is high, and faucets are used every day in daily life. Under such a high frequency of use, how can we maintain the faucet and increase its service life? In fact, this is not a difficult task. The following teaches you that as long as the installation, use and maintenance are correct, the actual service life of the faucet can not only be extended, but also can always keep it bright and new.
1. When the air temperature is below 0 degrees, if the handle of the faucet feels abnormal, it must be scalded with hot water until it feels normal before it can be used. Otherwise, it will affect the service life of the faucet valve core.
2. After the faucet is closed, there will be dripping, which is a normal phenomenon because the Kaiping faucet is caused by residual water in the inner cavity of the faucet. If it is long-term, more than ten minutes of dripping is leaking, indicating that the product has quality problems.
3. Because the water contains trace amounts of carbonate, it is easy to form scale on the metal surface after evaporation, which corrodes the surface of the faucet, affecting the cleaning and service life of the faucet. Therefore, after using the faucet, you should often use a soft cotton cloth or sponge and neutral soapy water to wipe the faucet surface (note: do not use corrosive or acidic items to wipe), and then wipe the surface dry with a soft cloth. Avoid using metal wire balls or scouring pads with hard particles.
4. Do not use too much force to turn the faucet on and off, just turn it gently. Even for traditional faucets, you don't need to twist it tightly. In particular, don't use the handle as a handrail to support or use it. Many people are accustomed to deliberately close the faucet after using the faucet, which is very undesirable. Not only will it not prevent water leakage, but it will damage the sealing valve and cause the faucet to be not closed tightly.
5. Clean impurities when the water flow becomes smaller. When the water pressure is not less than 0.02mpa, if you find that the water output is reduced, it may be blocked inside the faucet. The solution is to use a wrench to gently unscrew the water spout screen cover at the water outlet of the faucet, clean the impurities and then carefully install it, and it will generally be restored to its original state.
Previous
Professional Bathroom • Research And Manufacturing Experts
Contact Us
LODI sanitary ware
Tel: 0086-595-86392551
Email: sale2@lodisanitary.com
Address: Shunda Packaging, Luncang High-tech Development Zone, Nan'an City, Quanzhou City, Fujian Province, China